Fix assorted misstatements and poor wording in the descriptions of the I/O

tglsfdc · tglsfdc · commit 971e11028f67 · 2010-07-03T04:03:39.000Z
formats for geometric types.  Per bug #5536 from Jon Strait, and my own
testing.

Back-patch to all supported branches, since this doco has been wrong right
along -- we certainly haven't changed the I/O behavior of these types in
many years.
diff --git a/doc/src/sgml/datatype.sgml b/doc/src/sgml/datatype.sgml
@@ -1,5 +1,5 @@
 <!--
-$PostgreSQL: pgsql/doc/src/sgml/datatype.sgml,v 1.154.4.3 2008/01/02 19:53:17 mha Exp $
+$PostgreSQL: pgsql/doc/src/sgml/datatype.sgml,v 1.154.4.4 2010/07/03 04:03:39 tgl Exp $
 -->
 
  <chapter id="datatype">
@@ -2375,7 +2375,7 @@ SELECT * FROM test1 WHERE a;
 
    <para>
     A rich set of functions and operators is available to perform various geometric
-    operations such as scaling, translation, rotation, and determining 
+    operations such as scaling, translation, rotation, and determining
     intersections.  They are explained in <xref linkend="functions-geometry">.
    </para>
 
@@ -2387,8 +2387,9 @@ SELECT * FROM test1 WHERE a;
     </indexterm>
 
     <para>
-     Points are the fundamental two-dimensional building block for geometric types.
-     Values of type <type>point</type> are specified using the following syntax:
+     Points are the fundamental two-dimensional building block for geometric
+     types.  Values of type <type>point</type> are specified using either of
+     the following syntaxes:
 
 <synopsis>
 ( <replaceable>x</replaceable> , <replaceable>y</replaceable> )
@@ -2398,6 +2399,10 @@ SELECT * FROM test1 WHERE a;
      where <replaceable>x</> and <replaceable>y</> are the respective
      coordinates as floating-point numbers.
     </para>
+
+    <para>
+     Points are output using the first syntax.
+    </para>
    </sect2>
 
    <sect2>
@@ -2413,11 +2418,13 @@ SELECT * FROM test1 WHERE a;
 
     <para>
      Line segments (<type>lseg</type>) are represented by pairs of points.
-     Values of type <type>lseg</type> are specified using the following syntax:
+     Values of type <type>lseg</type> are specified using any of the following
+     syntaxes:
 
 <synopsis>
+[ ( <replaceable>x1</replaceable> , <replaceable>y1</replaceable> ) , ( <replaceable>x2</replaceable> , <replaceable>y2</replaceable> ) ]
 ( ( <replaceable>x1</replaceable> , <replaceable>y1</replaceable> ) , ( <replaceable>x2</replaceable> , <replaceable>y2</replaceable> ) )
-  ( <replaceable>x1</replaceable> , <replaceable>y1</replaceable> ) , ( <replaceable>x2</replaceable> , <replaceable>y2</replaceable> )  
+  ( <replaceable>x1</replaceable> , <replaceable>y1</replaceable> ) , ( <replaceable>x2</replaceable> , <replaceable>y2</replaceable> )
     <replaceable>x1</replaceable> , <replaceable>y1</replaceable>   ,   <replaceable>x2</replaceable> , <replaceable>y2</replaceable>
 </synopsis>
 
@@ -2427,6 +2434,10 @@ SELECT * FROM test1 WHERE a;
      <literal>(<replaceable>x2</replaceable>,<replaceable>y2</replaceable>)</literal>
      are the end points of the line segment.
     </para>
+
+    <para>
+     Line segments are output using the first syntax.
+    </para>
    </sect2>
 
    <sect2>
@@ -2443,11 +2454,12 @@ SELECT * FROM test1 WHERE a;
     <para>
      Boxes are represented by pairs of points that are opposite
      corners of the box.
-     Values of type <type>box</type> are specified using the following syntax:
+     Values of type <type>box</type> are specified using any of the following
+     syntaxes:
 
 <synopsis>
 ( ( <replaceable>x1</replaceable> , <replaceable>y1</replaceable> ) , ( <replaceable>x2</replaceable> , <replaceable>y2</replaceable> ) )
-  ( <replaceable>x1</replaceable> , <replaceable>y1</replaceable> ) , ( <replaceable>x2</replaceable> , <replaceable>y2</replaceable> )  
+  ( <replaceable>x1</replaceable> , <replaceable>y1</replaceable> ) , ( <replaceable>x2</replaceable> , <replaceable>y2</replaceable> )
     <replaceable>x1</replaceable> , <replaceable>y1</replaceable>   ,   <replaceable>x2</replaceable> , <replaceable>y2</replaceable>
 </synopsis>
 
@@ -2459,11 +2471,13 @@ SELECT * FROM test1 WHERE a;
     </para>
 
     <para>
-     Boxes are output using the first syntax.
-     The corners are reordered on input to store
-     the upper right corner, then the lower left corner.
-     Other corners of the box can be entered, but the lower
-     left and upper right corners are determined from the input and stored.
+     Boxes are output using the second syntax.
+    </para>
+
+    <para>
+     Any two opposite corners can be supplied on input, but the values
+     will be reordered as needed to store the
+     upper right and lower left corners, in that order.
     </para>
    </sect2>
 
@@ -2483,20 +2497,22 @@ SELECT * FROM test1 WHERE a;
     </para>
 
     <para>
-     Values of type <type>path</type> are specified using the following syntax:
+     Values of type <type>path</type> are specified using any of the following
+     syntaxes:
 
 <synopsis>
-( ( <replaceable>x1</replaceable> , <replaceable>y1</replaceable> ) , ... , ( <replaceable>xn</replaceable> , <replaceable>yn</replaceable> ) )
 [ ( <replaceable>x1</replaceable> , <replaceable>y1</replaceable> ) , ... , ( <replaceable>xn</replaceable> , <replaceable>yn</replaceable> ) ]
-  ( <replaceable>x1</replaceable> , <replaceable>y1</replaceable> ) , ... , ( <replaceable>xn</replaceable> , <replaceable>yn</replaceable> )  
-  ( <replaceable>x1</replaceable> , <replaceable>y1</replaceable>   , ... ,   <replaceable>xn</replaceable> , <replaceable>yn</replaceable> )  
-    <replaceable>x1</replaceable> , <replaceable>y1</replaceable>   , ... ,   <replaceable>xn</replaceable> , <replaceable>yn</replaceable>    
+( ( <replaceable>x1</replaceable> , <replaceable>y1</replaceable> ) , ... , ( <replaceable>xn</replaceable> , <replaceable>yn</replaceable> ) )
+  ( <replaceable>x1</replaceable> , <replaceable>y1</replaceable> ) , ... , ( <replaceable>xn</replaceable> , <replaceable>yn</replaceable> )
+  ( <replaceable>x1</replaceable> , <replaceable>y1</replaceable>   , ... ,   <replaceable>xn</replaceable> , <replaceable>yn</replaceable> )
+    <replaceable>x1</replaceable> , <replaceable>y1</replaceable>   , ... ,   <replaceable>xn</replaceable> , <replaceable>yn</replaceable>
 </synopsis>
 
      where the points are the end points of the line segments
      comprising the path.  Square brackets (<literal>[]</>) indicate
      an open path, while parentheses (<literal>()</>) indicate a
-     closed path.
+     closed path.  When the outermost parentheses are omitted, as
+     in the third through fifth syntaxes, a closed path is assumed.
     </para>
 
     <para>
@@ -2519,7 +2535,8 @@ SELECT * FROM test1 WHERE a;
     </para>
 
     <para>
-     Values of type <type>polygon</type> are specified using the following syntax:
+     Values of type <type>polygon</type> are specified using any of the
+     following syntaxes:
 
 <synopsis>
 ( ( <replaceable>x1</replaceable> , <replaceable>y1</replaceable> ) , ... , ( <replaceable>xn</replaceable> , <replaceable>yn</replaceable> ) )
@@ -2546,7 +2563,8 @@ SELECT * FROM test1 WHERE a;
 
     <para>
      Circles are represented by a center point and a radius.
-     Values of type <type>circle</type> are specified using the following syntax:
+     Values of type <type>circle</type> are specified using any of the
+     following syntaxes:
 
 <synopsis>
 &lt; ( <replaceable>x</replaceable> , <replaceable>y</replaceable> ) , <replaceable>r</replaceable> &gt;
@@ -2556,8 +2574,9 @@ SELECT * FROM test1 WHERE a;
 </synopsis>
 
      where
-     <literal>(<replaceable>x</replaceable>,<replaceable>y</replaceable>)</literal>
-     is the center and <replaceable>r</replaceable> is the radius of the circle.
+     <literal>(<replaceable>x</replaceable>,<replaceable>y</replaceable>)</>
+     is the center and <replaceable>r</replaceable> is the radius of the
+     circle.
     </para>
 
     <para>
